PDA

View Full Version : spektrum dx4c dsmr which receiver


raymo
28-03-2015, 03:51 PM
hi all,,,i have just got a dx4c and the receivers are £40 each,,is there any cheaper ones which will work or am i best off sticking with the sr410 which are recommended..thanks in advance ray

beale
28-03-2015, 04:25 PM
If you only need 2 channels I use these
http://www.rccarshop.co.uk/index.php/radios/receivers/spektrum/spmsr201-spektrum-sr201-2-channel-dsm-sport-surface-receiver-waterproof-coated.html

Orange RX from hobbyking are cheaper still but there have been issues with them I believe

raymo
28-03-2015, 11:52 PM
thanks for reply mate,,do you know if you can use a transponder in the bind socket ?

alex97
29-03-2015, 12:10 AM
The orange RX's no longer work with my dx4s so I'd say that the case for all the dx4 series. I use the 4 channel sport RX's from model sport. They are £29 and are really small so it helps with wiring.

shinytopman
29-03-2015, 02:49 AM
Hi
I use the orange rc receiver's without any issues.
But they only work if the handset firmware hasn't been updated. So worth a check.

HTH's

beale
29-03-2015, 06:22 AM
Yes bind port can be used for transponder

raymo
29-03-2015, 06:27 AM
thanks lads ,,2 channelone its is..:thumbsup:

drcarlos
03-06-2015, 08:32 PM
Just got myself a dx4c it was a tough choice between it and a sanwa mx-v but the fact that even sr410 receiver's are half the price of sanwas won out. Anyway do the sr201 receiver's still work as I have read soektrum have locked out the DSM protocol too in favour or dsm2 and dsmr?

Carl