losi xxx-ke help [Archive] - oOple.com Forums

greeny

03-04-2007, 04:07 PM

tyreman

03-04-2007, 05:45 PM

hi all, now in the processes off buyin a losi xxx-ke and was wondering parts are the least likely to brake and could someone give me a setup for it aswell.

ill be racing worn grass with reasonably big jumps and a modified motor!! in the UK, or yeah and gearing for a peak vantage 12x1

thanx jordan

This car was really strong I rarley broke anything on it.
but as a precaution I used to carry:
Rear shock tower, Front spindles and carriers, Pivot plate and a wishbone hanger block.

Link and shock positions as per instructions.

Front/Rear
Pistons Red/Red
Oil 27.5/27.5
Springs Green/Red
gearing 25/78

greeny

03-04-2007, 06:34 PM

hi, thanx for that sounds good does the car come with a manual or not??

thanx jordan

greeny

03-04-2007, 06:50 PM

hi agen, do the rear carriers on the xxx-cr fit the xxx-ke?? and the front carriers and the front and rear wishbones??

and how the hell do you get 27.5 oils etc... LOL

thanx jordan

tyreman

03-04-2007, 08:49 PM

hi agen, do the rear carriers on the xxx-cr fit the xxx-ke??
No the wishbones are the same length but the hubs have a different offset. If you wanted to to use these though you would also need to replace the pivot support to the XXXcr one here are the EA3 part numbers: A2129 hubs, A2113 pivot support, A2132 rear arms.
(By making this change you are effectivley making your car a XXXcr bar the front and rear towers and steering rack)

and the front carriers and the front and rear wishbones??
The front wishbones and carriers have been replaced by the XXXcr ones and are a direct fit, but you need to change both as there is a second outer hinge pin hole. EA3 Part numbers: A1112 front arms, A1122 spindles and carriers.

and how the hell do you get 27.5 oils etc... LOL
Losi do 22.5, 27.5, 32.5, 37.5 oils

thanx jordan

Hope this helps