22 REAR WEIGHT Cream Extreme RC + V2.0
 

Up date with V 2.0 16/09/2013

V2.0 now available....


http://img.photobucket.com/albums/v4...pse5936220.jpg

Added m2 retaining hole and milled step to rear to clear higher rear gearbox step up.

They have slimmed down a little on weight due to the extra machining, and now weigh in at just over 40g. ( -2g over original version)

Part is backwards compatible with the original Losi 22.

Price will be held at £20.00


Thanks to paulj for his assistance on the v2.0


==================================================
IN STOCK 22/09/12



The losi 22 has now had a little bit of Cream Extreme work :)


http://img.photobucket.com/albums/v4...eightbrass.jpg





Again made from brass and weighing in at 42g, which is 39g more than the rear hinge pin brace it replaces :) Sits perfectly just in front of the rear wheels which greatly removes the pendulum effect that rear end weight kits cause.

The price is £20 plus postage.




Postage cost...

Recorded postage is..

U.K. ...£2.50

E.U.... £8.90

None E.U. ...£9.40

I used 1 of these yesterday at Southport, a track which is multi surfaced mainly astroturf. The quality of finish is excellent!!

When the track got very dusty the back end wants to kick out under acceleration when using the TLR rear weight kit, and also within the corner the rear end wants to come round and kick out. With the CREAM weight fitted and the TLR weight removed from the back the car is total changed, the mid corner speed is greater due to no fear of the rear end kicking out and also coming out the corner the car stays straight. All in all the new weight from CREAM increases forward and side bite.

The rear TLR weight will still also be needed on high bite tracks/conditions, just to calm the car down.

Cheers
Chris

Thanks Chris for your input. :thumbsup:


All PM's replied to, I'm all but out of stock of these now just 3 left, and I'm awaiting material to make the next batch...


Thankyou everyone who has ordered one.

Regards
Noel



Update,
2 left.

4 reserved for SRCC drivers and 1 for 'learnerdriver'


Please make sure I have some left before sending payment. I don't want to upset anyone.

Regards
Noel




More will follow......

Everyone who bought and paid for this part upto midnight last night, Your items have been disspatched and you should have them tomorrow.
:thumbsup:

Great service :thumbsup::thumbsup:

Just arrived. Looks ace, can't wait to test it this friday:thumbsup::thumbsup::thumbsup:

Got mine
Very nice

got mine in the post today Ace :thumbsup:

A few more back in stock boys..

got mine in the post today, thanks :thumbsup:

Like to order one of these !
Dear cream you got message from me ...(PM)

ill be creaming my 22

LOL

Steady :blush::o

Got mine today - looks good.

Are people putting the anti squat shim under the weight, or shimming with washers above it ?

I'm running the degree shim, so it look a bit odd under the cream weight !

You will have to put antisquat shims underneath the weight as it now contains the wishbone mounts. If you just use spacers above all you will alter is the gearbox height and the wishbones will stay at zero degrees squat

You must use the shims under the weight to alter the front end of the wishbone height creating antisquat
Hth

Cheers Steeve, makes sense !

Received mine today, very nice.

Just got mine so currently my desk is being creamed!

LOL I could go on and on and on he he he

Charlie
 

We ran ours this weekend at the Oswestry national, along with our JM08 shortened chassis. The car was transformed, brilliant quality and service. Thanks:thumbsup:

Thank's for the feed back Charlie :thumbsup:



Postage charge added to first post.

I've currently 2 in stock which are awaiting confirmation of purchase.

After that I'm hoping to have the next batch ready towards the end of this week or the start of next week.