oOple.com Forums

oOple.com Forums (http://www.oople.com/forums/index.php)
-   Surrey & Hants RCCC (http://www.oople.com/forums/forumdisplay.php?f=138)
-   -   What Transponder ? (http://www.oople.com/forums/showthread.php?t=193308)

Dadio 21-10-2017 05:44 PM

What Transponder ?
 
As the title might suggest I've been searching but I can't find details of what Transponder I'd need , my friend and I popped down on a wet Thursday evening this week , liked what we saw and I did ask what Transponder we needed but the leaky grey matter has lost the answer , I remember it was a two wire one but if you could fill in the details I'd be very grateful .
Thanks Gav

daymo 21-10-2017 09:18 PM

Hey Gav

There are a few options I think not but not sure I am using one of these

http://www.ebay.co.uk/itm/MRT-mPTX-T...QAAOSwo0JWQR0G

Seems to do the job well

Damon

GoDaveGo 21-10-2017 10:15 PM

I use the two wire MYLAPS RC4 Hybrid Direct Powered Transponder - aka Harry

http://www.bbksoftware.com/

Cheers,
Dave
SHRCCC Secretary

Zippy G 22-10-2017 07:48 AM

transponders
 
1 Attachment(s)
Hi Mate
The best transponders are the AMB MyLaps as they will work anywhere you take them, this is simply because the decoders are AMB (most clubs run RC3 or RC4 Decoders)as is the software that they run(at most clubs). MRT hybrids will work at most tracks and are good but if AMB decide to update software as they have done in the past then the MRT can stop working until MRT release a fix.

The AMB 'PETE' is the older version which is slightly bigger than the newer ones but will work anywhere you take it, you can't buy these new anymore but used they range from 40/60

The AMB 'Harry' (2 wires)is the next model along from PETE, this is a smaller transponder which is what most racers use, they are small and will work anywhere you take them. New from BBK software 102, you can find them used for around 60/70

The AMB 'PERCY' is the latest release BUT it will ONLY work on RC4 decoders, SHRCCC run an RC3 decoder so it WILL NOT work. These to buy new are 75, used you can find them around 50/60

In the diagram I have attached the first 2 aren't used anymore, the one in the middle is 'PETE', the next one along is 'HARRY' and the last one is 'PERCY'.

Percy & Harry look very similar the only thing to distinguish them easily is that Harry has 2 wires & Percy has 3.
If you do need any of the above I have used ones available.

Hope this helps

Dadio 23-10-2017 09:23 AM

Thanks guys that should get me going in the right direction .

Dadio 24-10-2017 12:29 PM

Hi Zippy G
You mentioned you have some used transponders for sale , what have you got ? I'm probably looking for 2 x Rc3 or Rc4 , one for me and one for my friend .
Gav

dobber 24-10-2017 05:44 PM

Don't get rc4, get the rc3.

Rc4 is not backwards compatible so only works on rc4. Rc3 works on both.

A general rule is 3 wire pt's are rc4, where 2 wire are rc3.

Dadio 29-10-2017 08:37 PM

Thanks we will go for the rc3 ones .


All times are GMT. The time now is 02:04 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
oOple.com