Sanwa Gemini X problem.
 

Hi all,
After a little bit of advice. I have a Sanwa Gemini X that doesn't operate the steering servo correctly, doesn't move at all to the left and only a little bit to the right and generally doesn't act as it should. Have tried a different servo - same problem and a different receiver - same problem. So assume it must be my transmitter? Any ideas? And where would I be able to get it repaired?

Thanks in advance.

Andy

Open the radio up and make sure the potentiometer isnt moving when you operate the stick. If it is you need to centre it and secure with a little araldite or equivilent. The original glue has probably come loose.

Thanks for that, turned out to be a broken wire on the potentiometer, but it was checking your suggestion that helped me find it, so appreciate it.

Cheers. Andy