oOple.com Forums

oOple.com Forums (http://www.oople.com/forums/index.php)
-   HoBao (http://www.oople.com/forums/forumdisplay.php?f=206)
-   -   H2 pro spur gear change (http://www.oople.com/forums/showthread.php?t=157292)

clumsysaint 21-09-2014 07:40 PM

H2 pro spur gear change
 
Hobao h2 pro....what other spur gears can i use on it other than the kit one? Losi 22??

housecat777@gmail.com 01-10-2014 12:41 PM

I tried using the losi 22 one, I think it was the 83 tooth one, what i had to do was drill out the central hole where the spur goes onto the main shaft. Not sure what the diameter for the hole is but once you do that then it worked for me. To be honest it is probably easier to stick with the standard spur gear and try changing the pinion instead. But if you want to change the spur then just do what I did and that should work fine:)

housecat777@gmail.com 01-10-2014 12:43 PM

Just make sure that you get the 'modified' spur gear that comes with the bigger pads, not the smaller one.

Coopz 12-07-2015 08:21 AM

I also used a Losi 22 spur (70t) had to use losi slipper pads as the Hobao ones are completely different. Also it requires a drill as the hole is a fraction to narrow, just use a proper bench drill, I tried to do it first go with a cordless drill and botched it, it needs a precision hole drilled otherwise the gears don't mesh cleanly.


All times are GMT. The time now is 05:21 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
oOple.com