New In TORCH 1/8TH Electric Truggy KIT and RTR
 

• The Torch E is not a normal 1:8 scale truggy. You take 2 LiPo batterys and put it into a monster that is waiting for the elixir for life. The Torch E is based on the competition truggy T8TE.

• • 4WD all-wheel drive
  • Complete ball bearings
  • 17mm aluminium big bore shock absorbers
  • 3 differentials
  • Steel main gear
  • 3mm aluminium chassis plate with side guards
  • 5mm aluminium shock towers
  • CVD drive shafts at the front axle
  • Fully adjustable suspension with right-left hand thread
  
  
  

• http://www.absima.com/uploads/pics/t...ch_e_vl_02.jpg

• 
  Large volume 17mm big bore shocks provide maximum durability under all conditions. With multiple adjustments on the shock towers you can adjust your Torch E optimal for each track.
• http://www.absima.com/uploads/pics/t...h_e_det_02.jpg

• http://www.absima.com/uploads/pics/t...h_n_det_08.jpg
• 
  
  The plastic parts from the Torch E are same as the parts from the T8TE. That means they are just as strong and flexible. That makes your Torch E to a little competition truggy.

• 
  
  
  The Torch E is not a normal convertion from nitro to electric. The chassis layout is built for the optimum weight transfer. The motor position is in front of the middle axle and the battery position is in saddle format.
• http://www.absima.com/uploads/pics/t...h_e_det_04.jpg

• http://www.absima.com/uploads/pics/t...sis_vro_01.jpg
• 
  
  Through the relative far forward sedentary motor and battery mount position is the weight distribution in front of the buggy. Thereby you can control the Stoke E better by jumps. The position of the ESC is on top of the middle diff. There is the ESC protected of dirt and the position stands for good air cooling.

• • Mud guards at the rear axle
  • Fibre-reinforced high-quality plastic parts from the T8TE
  • Adjustable wheelbase
  • All-out brushless chassis layout
  • Aluminium steering rack
  • Swaybars at the front and rear axle
  • 2 battery boxes rigth/left arranged for optimum weight distribution
  • pre-printed body
  • Length: 590mm
  • Width: 430mm
  • Heigth: 220mm
  
  Itemnumber: TR8TEKIT
  
  
  

• http://www.absima.com/uploads/pics/t...ch_e_vl_01.jpg

Torch E 4WD Brushless RTR

Equipment:

• 2300 KV brushless motor thrust
• Water proof 120A brushless ESC thrust A8
• 2.4 GHz 2 channel radio control CR2S
• 9 Kg steering servo with metal gear S90MH
• 3 channel receiver

Available from your local hobby store. Visit www.s-m-d.co.uk