Schumacher kc build issues
I've just finished building my cougar kc but I've got a couple of issues that I'm struggling with so I'm hoping someone will be able to help point me in the right direction / tell me what I've done wrong.
1) steering / servo - I've mounted the servo as per the instructions but when ive connected the electronics the steering is reversed. I.e. when I turn the wheel left on the transmitter the wheels go right & Visa versa. 2) drive / power - I can get drive to the back wheels in a straight line but as soon as I turn the steering I lose drive to the rear wheels. Are the two issues related and is it going to a relatively simple fix? Thanks Phil |
First one's easy - servo reverse on channel 1 on your transmitter.
Second not so sure about, could be one of a few things like the servo browning out the receiver if it's drawing too much power. |
No the two issues are not related, as above issue one is an easy fix just reverse the channel on your transmitter.
Second one sounds like an electrical fault somewhere. I believe radio gear prioritises steering over drive as a safety feature, so you might have a loose connection of a damaged cable. Check your 3 pin servo lead going into the receiver and your 3 pin lead on your esc that is going into the receiver. |
All times are GMT. The time now is 08:42 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
oOple.com