oOple.com Forums

oOple.com Forums (http://www.oople.com/forums/index.php)
-   Schumacher (http://www.oople.com/forums/forumdisplay.php?f=46)
-   -   NOT a K2..... (http://www.oople.com/forums/showthread.php?t=193837)

olied 16-11-2017 10:07 AM

NOT a K2.....
 
2 Attachment(s)
A prototype at the worlds....

Wolvie 16-11-2017 10:26 AM

It could be shaft drive...

JohnM 16-11-2017 07:19 PM

Belt or shaft, doesn’t matter, the best bit is Trish’s face on the side window:lol:

olied 16-11-2017 07:22 PM

That’s what I thought 😂😂😂

bish 16-11-2017 08:13 PM

Haha, 100%! At the back, it looks like it has stiffeners like the KC mounted to the upper rear alloy gear (belt) box.

adey 16-11-2017 08:19 PM

Correct me if I am wrong but are those front arms off a tlr 22 4.0 2wd car ?

micholix 17-11-2017 01:52 PM

2 Attachment(s)
Quote:

Originally Posted by adey (Post 980899)
Correct me if I am wrong but are those front arms off a tlr 22 4.0 2wd car ?

I thought the same, but by comparing pictures of them, they look a little bit different?
Rear a arms are different to the current k2 armes, they have two outer holes for the hubs.

stevereecekatelyn 08-12-2017 09:27 PM

Any more news on a possible date for a new 4wd buggy??

Navek668 08-12-2017 10:02 PM

Been thinking the same for a few weeks now, come on Schumacher, over 2 years now an update is due surely???

gd26 09-12-2017 12:49 AM

It will be released about March time no specific date whether it will be start middle or end. But there still in the development stage I was told

cmgreen 09-12-2017 07:40 AM

And where did this info come from?

Paultje040 09-12-2017 12:59 PM

1 Attachment(s)
How is the motormount held in place? Definetly not by 4 screws we see with a shaft setup or like the K2

dikke hond 11-12-2017 07:16 PM

Quote:

Originally Posted by Paultje040 (Post 981647)
How is the motormount held in place? Definetly not by 4 screws we see with a shaft setup or like the K2

I was wondering over the same thing...

micholix 12-12-2017 07:29 PM

I was thinking about a kind of layout, like the mi-6 touring car would match the center line screw holes at the chassis!?
Also the kind of top deck mounting we saw in some pictures and at one picture i could see a part of an floating servo mount?

Looking forward to get some more informations, or pictures...:thumbsup:

bish 12-12-2017 11:54 PM

Micholix, have you seen the front top decks fitted to a KC? I've not, but looking at the parts catalogue they look like they are mount 'vertically' rather than the KF2 version, like an Mi6.
Use that on a 4wd and you can keep belts tensioned properly and adjust the torsional stiffness of the chassis. Hmm...

micholix 13-12-2017 07:25 AM

Bish, i have not seen a KC with the front top deck mounted eather, i only found one set up sheet at petitrc, witch stated the mount of it, but no pictures!

A layout like that would be great at an 4wd buggy, i guess.

We‘ll see...

obi-wan 26-12-2017 04:03 PM

Any more news on this?

micholix 07-01-2018 08:20 AM

The new cat looks great at the DHI Cup qualifications, Orlowsky 1st and Neumann 4th, so far!
Looking forward to the final results...:thumbsup:

Wolvie 07-01-2018 11:07 AM

And belt drive.

micholix 07-01-2018 12:46 PM

Quote:

Originally Posted by Wolvie (Post 982479)
And belt drive.

Yes, i guess too, Wolvie, or did you see it?


All times are GMT. The time now is 11:16 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
oOple.com