I have some glitch issues, here is my email to and from frsky ...... hope you guys have a better advice for me.

hi,

I have a frsky module in my kopropo ex10 helios and
V8R4-II
V8R7-II
receivers in two different cars. as long as I drive alone there are no problems, but when driving with other people running sanwa systems I have ocassional glitches. what can I do?"



"Dear Lud,

Thanks contact us, I I suspect that our system has a mutual interference with their radio system, so we suggest you don't use in the same place.

Wish you have a good day.

Best regards
Ray.
------

Has anyone got a link to the best place to buy the module and receivers.

Cheers

EDIT

If i remember its this one, is that correct. Found it whilst looking for a new transmitter for my Mini Quad lol


https://www.t9hobbysport.com/frsky-d...try-diy-module

KO Esprit 3
 

Hi just wondering if anyone has the pin layout, I did look through the post but all the photo links seem to have expired.

Many thanks

Any names for the torrent sites to search on


pcb assembly

Anyone?
 

Looking to do this to a KO propo Mars radio.

Anyone????

KO pin output??

Orange RX DIY module be a good one to use for this???

James

Hi everyone. I know this an old thread. But I really hope someone could help me out. I've got a Frsky 2.4 converted Espirit 2 Type R. It haven't been switched on in quite awhile. Decided to get new AA batteries and switch it on. When I switched it on. The Transmitter blue power on led light kept blinking. Is it normal? Thanks...

Do you mean on the frsky module? Perhaps it means it’s not bound? I would try to rebind to the receiver and see what happens.

Oh actually if you mean the original KO led light, the blinking depends on certain conditions ie it means you have certain options switched on eg like abs braking or whatever. It’s in the hugely confusing instructions somewhere. It does not mean there is a problem.

Thanks for the reply. Much appreciated. Yes it's the Ko Propi Esprit 2 Type R blue led light that's blinking. So I take it that it's from the Ko and not from the Frsky module? And that everything is ok?

Blue light blinking is likely to be your ABS switched-on on the TX.

Has anybody got a link to the latest hack module for the KO Esprit II? I can seem to find any FRSky DHT modules in stock now.

TIA.

The DHT isn't viable anymore, this is the latest model.

https://www.t9hobbysport.com/frsky-x...-d8-diy-module

Thanks Ross :thumbsup:

Frsky board coversion is it easy to fit in HiTec Flash
 

I have a Frsky DHT board in black shrink will this conversion fit in a HiTec Flash stick radio

Futaba t3vcs
 

Hi I getting back into racing after a few years.
My Futaba t3vcs module has finally give up.
So wanted to know if this hack will work on it.
If it does please share links to buy.
If not could you recommend a suitable 2.4 module please.
Peter

Get a Sanwa Gemini X and is £150 but performs to the higest level, its nice to hold and can tune it perfectly with plenty of sections for each car you have.