I dont have the tx at hand to photograph, but I got the connection info from a link in a 2009 thread on this subject on oople.
http://www.freewebs.com/nrccctest/koconversion.pdf
This was actally a spectrum module conversion but the pin connectors are the same as a ko module. Hope this helps. I dont actually solder to the modules direct, but solder to pin connectors and just plug in.
Mike

Hmm, would this work in a KO Esprit 1?:confused:

Hey Pete, hows them imperial drivers working out? :lol:

No idea if this would work on an Esprit 1 - ive never seen one to know how they work, and cant even find them on Internet!?
Only thing I could find was this on the KO America website:
Q. Can I use an Esprit module with Vantage Esprit II?
A. No. If you use Esprit module, the RF output becomes low and it could lead to a problem.

not sure where that leaves us?

:D I'll have to ask the postie that!

Yeah, I couldn't see any info online either, guess that trying it would be the only way to find out. I'll have to take the case off and see how the wiring compares to your photos

Yes, modules are the same.

hi has anyone tried this in a hitec eclipse pro car or say if this will fit right in were the 40mhz module fits at the back of handset
http://www.giantcod.co.uk/24ghz-comm...-p-405723.html

Any Futaba module, air or surface, should work in the Hitec Eclipse, which is the stick version of my Hitec CRX - see my earlier comment about it.

thanks i think i will get one and try it :thumbsup:

Have just put one of these in a KO esprit 3, Works great, range is more than i will ever need. Very impressed and thanks Cardnim for all your help.

My Futaba 3VC conversion also works great. Fantastic system

Thanks to all the info on here and Cardnim's awesome walk through I've done this to my old Esprit 2 Type R. Only tried it in the flat so far, but always binds up in an instant and is pretty darn simple.

I'll await for some track testing, but it would be surprised if this doesn't kick the arse off my esprit 3. The universe is always failing in some way or other. How amazing is it that I can get my preferred tranny, in 2.4gig and at such an insane price? Awesome.

Woo hoo!:thumbsup:

now I need to find out how to do the conversion to a sanwa gemini 2!

This may help, cannot remember where I found it, an American site, and have not done my Gemini yet, do have the bits and have the back off the tranny, looks much the same. Usuall disclaimers......

Will be interested to see where you put the binding button & aerial.

Cheers JCJC:D
Is a friends, so will see what he can come up with

Track tested, awesome!

will any of the frsky modules fit the ko universe 3 tx.

I have one fitted in my KO esprit 3, used at two meetings now and works perfectly.

Have you fitted the internal pack of your esprit3? Or do they make an external one that just clips in?

Just fitted this to my KO using these instructions and really pleased.

Thank you for a great thread

Great post :)
Anywhere other than Cod sell these things - they are out of stock :(