Mardave meteor upgrade axles.
 

To continue the latest trend of meteor parts wanted!

I'm after one or 2 sets of the upgrade axles especially rears that fasten the wheels on with nuts, I can easily make the fronts as I did when I sheared mine racing, but the rears are too complex.

Can anyone help me finish off my 2 back in the day racers?

You can use Cobra rear axles.

Put a long(about 12-15 mm if memory serves)M3(again,if memory serves)grub
screw(threadlock it in)into the wheel reataining screw thread and use a nut/washer
to hold the wheels on.

Again if memory serves(he is 56 you know),you'll need a spacer on the axle between the outer bearing and the drive pin,white Tamiya nylon axle bushings fit perfectly.

You'll still be inside the BRCA 10" limit for width.

Many thanks for that!

upgrades
 

Hi there i have a full set almost new
Could post them out today total including trackable postage £10
Thanks
Mike

Hi Mike its a deal! Do you only have one set or could you scrape a second together?

Is it possible to have a picture of them just to make sure they are the right ones?

Many thanks

Oliver