Identity Help
Hi there, finally pulled my 90's stuff out of the shed after about 15 years lol I know 1 is a super dogfighter 2 but I'm having trouble with the other 2
This is a predator but cant figure which one as I cant remember was it buggy or dtm back when picked up and I've all parts for both although anyone know of a buggy shell let me know please http://i842.photobucket.com/albums/z...ps0f1e68ec.jpg second ones a kyosho I picked up a few years back but never got round to straightening her out http://i842.photobucket.com/albums/z...ps345f7ed7.jpg http://i842.photobucket.com/albums/z...psd176381c.jpg http://i842.photobucket.com/albums/z...ps92d8bf12.jpg and heres the dogfighter in need of wishbone and the front gearbox section it mounts to http://i842.photobucket.com/albums/z...ps29c30f97.jpg http://i842.photobucket.com/albums/z...psa41e2653.jpg http://i842.photobucket.com/albums/z...psff455dac.jpg Only one I'll definitely be putting into use is the Pred not sure what to do with the others yet but the are on offer in exchange for a landmax at the moment be that good or bad I'm not sure yet lol |
Kyosho is a lazer zx
|
Kyosho is a very original Lazer ZX, unusual to see one that's been raced that still has the belt guards fitted.
Yokomo is an MR4-BC Can't be exact based on the photo but the Predator is most likely to be a 95Tee, their first touring car. |
Would I be crazy to trade the zx and yoko against a landmax? I'm not sure of any values here. May have deal against a landmax with spare nearly rolling chassis but don't know what's worth what and I'm kinda liking the thought of finally having a nitro car lol
|
Anyone know where to find the parts needed to sort that mr4 out? Or what other model parts fit too. Wishbone and the gearbox housing it pivots on are all it needs
|
YO!
You have most of a MR4bc there! Difficult to precisely know what need replacing. I suggest. 1. Get a copy of the manual from Competition X or Sosidge's website - google search. 2. Strip the car down completely. Wash all bits. Spray with GT85. 3. Throw most of the screws away a replace with stainless steel hex heads (I recommend Westfield fasteners). 4. Determine what needs replacing using the manual. Looking at your pics I can be fairly confident you need to do away with the front bulkhead and shock tower. Now, some of these parts can be found on end-of-line rc.com (google search) others will need an ebay search. I think you can use YZ10 rims, but need to check that! These rims can be bought easily from JC racing (google search). 5. If you need new wing and body, you can find this on ebay (Team Bluegroove). It may be a lot of work...but you could end up with an awesome restoration with some patience. Naushad |
Just got offered €50 for the yokomo as it is which I think I'll take and restore the zx and predator. And yeah it's just the bulkhead and wishbone the tower is sorted.
|
Team blue groove do predator shells but im unsure if they fit the older modles. looks to wide to be the dtm but could just be the picture,
ive got the streetwise but looking at a dtm too at the moment |
The most popular 1/10 when I was about was the wider 1/10 think the tamiya were about 10-15 mm narrower and the pred I think was a case of choose your size
|
The dtm and streetwise are 200mm wide opposed to the tamiya 190mm but I think the firs buggy converted ones were wider again
|
Well the BmW M3 shell off my kyosho buggy fits but only just so am guessing its a shade over 200, will try get a chance to measure it tomorrow. Of and the bugs definitely bitten. Spotted an XUT Pro for handy money and went all out. It's hiding in the boot from the missus lol
|
Quote:
If it's going to be converted into the buggy version any Predator bodyshell will fit the chassis. |
Quote:
|
Well had an xut land in my lap as a present so all 3 above are open for offers
|
All times are GMT. The time now is 09:02 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
oOple.com