oOple.com Forums

oOple.com Forums (http://www.oople.com/forums/index.php)
-   KYOSHO (http://www.oople.com/forums/forumdisplay.php?f=10)
-   -   Small bore triple cap shocks leaking!! (http://www.oople.com/forums/showthread.php?t=155113)

bretts 10-08-2014 04:11 PM

Small bore triple cap shocks leaking!!
 
Can someone help?

Can someone give me a step by step guide on how to build these correctly?

I can't seem to build these without them leaking.

I'm following all the instructions but a bead of oil seems to always start to leak from the top edge of the shock seal where it screws into the shock body. If you follow me. Also, yes the rubber seal is inplace.

This is a picture of the big bores but the oil seems to come out of the top of the grove in the seal. (see picture) I thought I was putting too much oil in but they are still leaking.


http://www.infernosonly.com/v/vspfil...303-04BL-1.jpg

Thanks in advance

Brett

charlesk 11-08-2014 07:27 AM

Worn o-ring?
Have you tried using new ones?
Follow this guide:
http://m.youtube.com/watch?v=nnqX_siiosg

HOTSHOT III 11-08-2014 01:13 PM

Quote:

Originally Posted by charlesk (Post 870671)
Worn o-ring?
Have you tried using new ones?
Follow this guide:
http://m.youtube.com/watch?v=nnqX_siiosg

Agreed, plus the fact most Kyosho triple cap shock O-Rings are very odd sizes and you can't get them anywhere.

I tried my local bearing suppliers and they'd never seen anything like them, they're all in halves of a millimetre to force you to buy them from Kyosho:thumbdown:

This means if you bought the shocks used the previous owner might have replaced them with some that are the wrong size, replace them by part number and it should cure it.

bretts 11-08-2014 02:01 PM

Thanks guys,

I'll do as you suggest, also will rebuild with some green slime.

bobbin 11-08-2014 02:04 PM

these are the o rings i use in my kyosho small bores, no leaks at all.

http://insidelineracing.co.uk/inside...-shock-seals-p

bretts 11-08-2014 04:35 PM

cheers bobbin,

do you think these are same/different to the 'northy whitees' i've got some northy ones, which do feel a lot softer than the kyosho orange ones?

btw I found the Revolution ones last night but couldn't find a shop in the uk, so great thanks

charlesk 11-08-2014 04:44 PM

Those orings are for the shock shaft.
Depending where the leak comes from, is it between the shaft and the cartridge, then those should do.
If it is between the cartridge and body then not, you'll need a very different size...

bretts 11-08-2014 05:26 PM

Yep, I've got Kyosho part w5181-05 medium o rings too.

So with these and some new shaft o rings and green slime, I should stop these beggers leaking.


All times are GMT. The time now is 01:55 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
oOple.com