Sunday 12th
We are racin this sunday, we r on the dirt this week, but as always weather permitting.
Would not mind grass as I enjoyed the new layout (thank u jcb n dave) still needs a few little tweaks, rumble strip on corners ( idea- broom handles hammered deep into grass and pinned at ends. About 6 in a fan shape, on a corner). And bring a broomhandle day is born.. :o |
I'll be there, thought one of these might be handy:
http://www.modelsport.co.uk/kyosho-e...roducts/366691 :lol: |
I should be there. My car is all pretty and new looking again, even has some new bling :D
I shall reserve the right to not be there at the last min though :) the next couple of weekend might be a bit hectic for me. J |
Quote:
They tried something similar at a national a few years back and ended up taking them out after the first round of practice as it was too random with them lifting up and people getting stuck in the pins. Not saying it wouldn't work at NBC, but I think with the ground being sandy it would lead to the track cutting up a lot in that area too. I won't be at this one, but will be there at the end of the month :) |
Hmm well there is another way of making a rumble strip:thumbsup:
Now I think we may need a plan B this weekend, the trmp is not getting high enough and I suspect both tracks will be snow bound still,have to wait and see. So plan B, better see if kellers is still going indoors on sunday night? |
Would this mean i'd want to be gluing up the yellow mini pins i bought by mistake :confused:
(& on the front too ?) |
How about we clear the snow n race on d FROZEN dirt... or ROLLER the snow and ICE RACE...
yes to mini pins 4 kellers, you can use normal spikes, but pins are better. |
Quote:
|
Thanks Jon, so mini pin yellows for the rear & "slim" (ie, 2wd) mini pin yellows on the front :)
I just know that if i get some ready that'll be sure to melt the snow, dry the track & not end up using them, lol. |
Quote:
Thats it, I think I ended up cutting two rows off the inside and outside of the fronts and 1 off the outside of the rears last time I raced at kellers. I'd be tempted to mount them on rims, but not glue them up. At least that way you can take them off, but will only take a minute to glue once you know where your racing. It's worth noting that your not allowed to glue them in the hall at kellers! |
ok, I have been and had a look at the on the way home tonight,there is about one to two inches of snow still on it:bored:.now if we get a thaw the track drains well, it will still be usable. But I very mutch doubt we will get high enough temps in nthe next 2 days.
So before I try to contact kellers to see if they are racing & if we could go and play I need to know who could come, we need about 4 or five minimum to make a heat. kellers runs on sunday night at trouse think they finish about 10ish. So who could come?????????????????????? Dave |
As it stands atm I wont be making the trip... It's a blizzard here in Littleport and it's set to continue tomorrow and possible to the weekend so I don't think I'll be making the trip in these conditions.
I'm not even sure I'll make it to work tomorrow :) Sorry chaps. J |
I'll definately go, shame it snowed at all as generally it's otherwise been very 'freeze dried' weather, lol.
Jon, thanks for tyre info, for some reason i have a pair of new 4wd minipin yellows, do you think i could remove enough rows of pins to make them work, lol ? If not i'll have to settle with stagger ribs if i can't get to a shop soon. |
don't panic dan. the stagger ribs will be fine if you are using the mid car,and the 4wd fronts will be wayyyy to much unless you are using the mad rat then you may get away with them
|
I'd have both cars with me, i guess the mid would be better on the wood (is it wood, lol?)
|
tyres
staggers are what i would use
|
Quote:
|
I should know that, i've been in there watching with Shaun (a mate, who knows a few guys there as he used to run TC's years ago).
I won't rush out to buy front minipins then, i'll just make sure i have the rears ready to use. Just spoke to Shaun (who now has his RTR brushless Monkey), he says he'd come, & another mate (Steve who, also thanks to me, lol, has a RTR Mad Rat) may possible come too :D |
Dan is on the ansmann payroll:lol:...on the hard sell
|
I think a commission scheme of some sort wouldn't go amiss :lol:
|
All times are GMT. The time now is 10:54 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
oOple.com