511 chassis upgrade belts
 

Can anyone help out with supply of the upgrade 511 chassis kit belts??

Any links etc would be appreciated

Tamiya USA has them in stock... do you have the part # Mark..?? or do you need it....
I have about 6 of these belts if you of need of a set:thumbsup:

Found this info whilst looking into the upgrade kit belts, yes 2 would be great

http://i783.photobucket.com/albums/y...F4D899D072.jpg

Just to check the upgrade set uses the same length belt 16248001 front and rear??

If you can confirm both belt part numbers that would be appreciated

Yes same belt front and rear is used ;)

I,m running the standard 511 belts (369mm) on my 511 which has the upgrade kit on it but with the 501 pulleys on the slipper shaft, these are the 16t, whereas the 511 runs 18t.
The pinion grub screw will run close to the front belt, if its too long just make it slightly shorter, mines run like this for over a year now

Thanks Dave and Cobra

I'm using the 503 alloy one piece centre pulley as I kept stripping the centre of the kit plastic pulleys but I have an option for the std belts which is cool

Mark I sent you a PM... I have your covered:):thumbsup: