oOple.com Forums

oOple.com Forums (http://www.oople.com/forums/index.php)
-   KYOSHO (http://www.oople.com/forums/forumdisplay.php?f=10)
-   -   Kyosho Big bore tapered pistons (http://www.oople.com/forums/showthread.php?t=77345)

Nick 08-08-2011 11:36 AM

Kyosho Big bore tapered pistons
 
Now available Kyosho Big bore taper pistons! I have a couple of sets out on test at the moment with Tobys & NJC11 on her. Toby ran his FS2 yesterday at NDOR mid east regional which is a low grip astro track very bumpy with very large jumps! I believe he ran 5 holes 1.3mm front with 5 holes 1.4mm rear car looked real good all day.



http://www.gurnellrc.com/ForumImages...ns/Pistons.jpg


There is a choice of 3, 4, 5, & 6 holes pistons with 1.2 mm,to 1.65mm holes in 0.05mm steps.



Please PM me if you are interested in purchasing a set. I’m selling then at £6 a pair with free postage but as they are made to order, please expect delivery in approx 3-4 days for delivery.


chricke 10-08-2011 09:51 AM

it seems like i cant send you a PM (0 messages in sent)
but i want to buy 4 pistons from you!

Nick 10-08-2011 11:48 AM

i sent you a pm mate

Nick 12-10-2011 08:58 PM

Hi all just to say all orders have been packed and are in the post tomorrow! Also I have sent some out for testing to the Uk team so some setup should start to come through with the big bores in the next couple of weeks.
:thumbsup:

Nick 22-11-2011 02:53 PM

Hi just to say thanks for the orders and they have all been posted at lunch :thumbsup:

quarter throttle 26-11-2011 12:14 PM

remember to bring me a set to worksop tomorrow ;)

Ash

Nick 05-01-2012 12:18 PM

Just to say all pistons ordered before 11 last night have just been posted:thumbsup:
Many thanks for the orders and happy New Year

Nick 12-01-2012 01:46 PM

All piston orders have been posted. See you all at area 51 guys :thumbsup:

RudeTony 12-01-2012 09:24 PM

Highly recommended by all the Kyosho Team

RogerM 13-01-2012 12:19 PM

Nick, I hope you bring some spares with you.

I am impressed by the quality of them and they are definitely getting the job done!!! :D

DJFlyinbin 27-01-2012 06:42 PM

Do you do tapered pistons for the small bores too?

Nick 27-01-2012 07:27 PM

sorry no only big bores at the moment

Nick 04-02-2012 10:51 AM

Hi all just to say all orders have just been posted:thumbsup:

mikeyscott 04-02-2012 10:58 AM

Hi

What are people using these days?

I am trying 1.4 rears which feels good

Nick 04-02-2012 11:03 AM

I have been selling a large range of sizes! i think on the 4wd 1.3x5 front 1.4x5 rear still seems to be most popular

RogerM 04-02-2012 01:40 PM

Nick,

did you get my e-mail from a few days back???

1.3x5 & 1.4x5 will work just about anywhere in my experience but I am playing with a bit more pack in the front at the moment and liking the 4x1.2 option with circa 37.5wt oil.

I am still experimenting with the rear of the 4wd but am struggling to get much better than the 5x1.4 option ..... maybe that's just where the balance point is at! Will keep everybody updated as I find better options (Assuming I do)

For 2wd I am currently 4x1.4 at both ends of the car running 35/30wt oil Fr/Rr.

All oils are AE by the way.

mikeyscott 04-02-2012 02:01 PM

I need to order some 5 x 1.3 at some point.

I'll also check out the 4 x config for the Vega etc.

I'm running Losi oils, which I think are thicker.

Nick 14-02-2012 08:22 AM

Hi all! All orders was posted out last night :thumbsup:

RogerM 14-02-2012 12:32 PM

Even my monster shipment mate?

Seriously though, Nick is sending me a vast selection and myself and my merry band of helpers will get the big bore shock setups sorted out before the season starts :)

Nick 14-02-2012 12:39 PM

Sorry Roger yours are going through this week :thumbsup:


All times are GMT. The time now is 06:49 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
oOple.com