Thread: CAT SX SETUPS
View Single Post
  #20  
Old 13-11-2009
Mossy Mossy is offline
Senior Member
 
Join Date: Feb 2007
Location: Stoke
Posts: 553
Send a message via MSN to Mossy
Default

Bury Metro Indoors Tq Setup

Front -

Track Washers - 1mm front and back
Roll Bar - No
Shock Position Mount - Middle
Shock Position Wishbone - Middle
Front Rake - 10 Degrees
Washers - 0mm
Front Link Bracket - 38.5mm
Washers on Hub - 0
Alloy 7.5 degree front Yokes.

Rear -
Wheel Base - Short
Toe In - 3mm Rear, .5mm front = 3.25 degrees
Anti Squat Washers - 0mm Rear, 3.5mm Front (rear hole 4mm higher on rear gearbox housing than standard)
Rear Link Bracket - 38.5mm
Washers - 3mm
Shock Position Mount - Middle
Shock Position Wishbone - Inside
Hub Postion - Middle
Roll Bar - No


Shocks

Front -
35wt on 3 Holes Drilled 55s
Schumacher Old Grey Springs
Diaphragm - Centre cut out and removed
Ride Height - Wishbones level

Rear -
30wt on 2 Holes Drilled 55s
Schumacher Old Red Springs
Diaphragm - Centre cut out and removed
Ride Height - Wishbones level

Transmission-
Rear Diff Height - Low
Front Diff Height - Low
Layshaft Pulley - Pin Through
Front Drive - One Way
Gearing - 81 x 22 on Speed Passion 5.5
Internal Ratio - 33 Tooth Pulley

Tyres
Yellow Mini Pin all round, Schumacher Tubby Green Inserts Rear, Schumacher Green Front

Si
__________________
Schumacher, Hobby Wing, Thunder Power, Anderson, Sanwa, Trishbits, P-Dub Racing, Rudebits, Inside Line, Nuclear RC, RC Domination, RPC
Reply With Quote