I'm using all corally electrics in my PR buggies. goes very well.
if you get the speedo, make sure you get the programmer as well as you cant adjust any settings without it.
I use the full size servos in all my 1/10th and 1/8 scale. good thing if you are using the Cerix 160 and the corally servos is that the Cerix has an adjustable BEC and the servos are fine with 7.2v giving you a bit more speed and torque.
one tip with the speedo though. if you are using the supplied fan, put an M2.5 washer in between the top of the fan and the guard, otherwise the fan blades will break off after a heavy landing.
Last edited by richm; 21-12-2016 at 07:26 PM.
|