Here is how I done it, basically just glued carbon angle with PU-based plastic adhesive. Underside has also carbon doubler glued in place.
I think glueing is acceptable way here since part was already broken
Only problem was to find carbon part with tight enough radius, but I was lucky to find some with 1mm radius lying around! Still need to replace those lower bind screws to normal ones, they are bottoming in radius area.
Using those extra holes needs molding, as you said. That makes things more complicated..
Other pic shows my progress with ZX-RR. I have all the parts now, so itīs quite straight-forward to assemble everything.
Modelling motor plate atm, thatīs why itīs missing!
Quote:
Originally Posted by Welshy40
You could drill through the tower mount section in the middle and put a cf plate bolting to the two holes already designed into the side of the mount and the tower section on both sides should be sufficient to do the job. I hope i make sense
|