Quote:
Originally Posted by RSharpy
Bondy to be fair that little white bit doesn't do an awful lot, as long as the nuts tight!!
As they would say on the football terrace.... after 22 years!!.... YOU DON'T KNOW WHAT YOUR DOING!!!!
|
FOR THE SECOND TIME ! LOOK AT THE DRAWING !!! THERES NO ******* NUT THERE ITS A HEAD WITH A SLOT IN IT SO YOU CAN HOLD IT TIGHT WITH A ALLEN WRENCH WHILE YOU ATTATCH EVERYTHING AND TIGHTEN UP THE NUT ON THE OPOSITE SIDE. THE HEAD WHEN THE SLIPPER IS SLIPPING ACTUALL TURNS INSIDE THE CUP THATS WHY YOU PUT GREASE ON THE SHAFT ! THE LITTLE WHITE SPCER JUST KEEPS THE SMALL CENTER SHAFT FROM TOUCHING THIS WHEN IT ROTATES HENCE "ITS WORN A LITTLE "
OR you could just be taking this piss , so I will sort you out on sunday matey !!!!