Quote:
Originally Posted by BORMAC
I am toying with the idea of converting an old BURNS 4WD from nitro to electric and wanted to ask around to see if anyone would know if this is possible. I know you can purchase INFERNO kits but not sure if parts of these would suit the earlier Burns car. I am happy to cut, drill and modify stuff but so long as I can get the motor mounted I can sort the rest (I think).
Any suggestions, ideas or points you'd like to raise would be very welcome.
Thanks- Jason
|
check this link out. the motor mount is perfect for this one. idk if it would work out as well in the kyosho but i bought the same mount and it worked perfect.
http://www.rctech.net/forum/monster-...dget-flux.html
here are the parts I bought from hobby king. i did not have to cut the motor mount as was shown in the budget savage build. I also opened the trans, used JBweld to lock the oneway gear to the shaft, so i would have brake and reverse.
A2016T-33138 Motor Mount (1Set/Bag) - A2016T
http://www.hobbyking.com/hobbyking/s...ag_A2016T.html
it is for 36mm diamater L or XL motors. and you adjust gear mesh just like with the nitro motor.