[Origineelreclamebord]

Originally Posted by LiamC

The car is running a RDRP +11mm chassis, which doesn’t restrict the droop (droop screws don’t actually touch the chassis plate), so I’m guessing you mean that when the damper is fully extended on the car it should be at 40mm max ride height, possibly slightly lower? I’m new to buggies so still learning at the moment.

Thanks for your quick response.

Yep, in that the car should have a 40mm ride height at the rear when the dampers are fully extended.

PS: Do watch how your driveshafts are seated when you run a ball diff with short outdrives (that came with the 210V1). The V1 had less rear droop than the V2, increasing it reduces the depth with which the driveshafts sit in the outdrives. The V2 uses longer outdrives to get good clearance at those droop levels, with the V1 just monitor if it runs safely/smoothly inside the outdrives (I have seen people run V1s that way).