#3310 was designed for the original X - 6 with 3-gear transmission and #3010 bent rear arms. That is the only car #3310 is certain to fit correctly with all four trans shims the same.
#3310 may well fit on the Squared, and even possibly on the Cubed, as the four vertical holes which hold in the transmission are in the same place, but if you do that you'll have to account for all sorts of other issues. First, the difference in transmission shims front to rear, and second, you'll want the bent arms to maintain suspension geometry.
To sum up, I'd only use #3310 to restore an original X - 6 to as-new condition. If you have an original X - 6 that has been upgraded to 4-Gear, or a Squared or Cubed, I'd stick with the bulkhead-and-CF-tower that is correct for those cars.
|