View Single Post
  #4  
Old 20-05-2016
Allan1875 Allan1875 is offline
Senior Member
 
Join Date: Nov 2010
Location: Scotland
Posts: 609
Default

Quote:
Originally Posted by adey View Post
I think inside line do a ready prepared rear tower if needed
This is correct, however it's easy enough to do it to the standard one. You also need to space the upper shock mounts with 2mm washers to try and keep the correct angle on the shocks.

You also need to drill the wishbones. You can flip them but this changes the driveshaft angle. It's better just to drill new ones, or just go all out and swap to flash wishbones from the TC02c as they are far better on the car.
__________________
Ardgay Models
Schumacher
CORE-RC
Hobbywing
Mark One Designs
Reply With Quote