Thread: Setups!
View Single Post
  #30  
Old 21-12-2009
blitzboy's Avatar
blitzboy blitzboy is offline
*SuPeRsTaR mEmBeR*
 
Join Date: Nov 2007
Location: spalding
Posts: 3,570
Send a message via MSN to blitzboy
Default worksop set up

right guys thought i d put this up as the car ran so well for me
front
middle hole on tower
outer hole on wishbone
losi shock
shaft lenght 23mm
losi red piston
32.5 weight losi oil with losi red piston
.5 degree toe out
2 deg camber
1mm spacer on inside hole on top of the hub
inner hole on tower for turnbuckle
front hubs down
standard diff
front blocks as kit set up
front drive shafts level
ride height 21mm side of chassis

rear
middle hole on tower
outside hole on wishbone
X5 losi shocks
3o mm shaft length put 4mm spacer inside shock to reduce droop
30 weight losi oil with losi red piston
1.2 mm roll bar
rear hubs on short wheel base
rear blocks as kit set up
rear turnbuckles as kit position
2 deg camber
ride height 22 mm
standard diff

mine is the 09 spec kit so ugraded the out drives to light weight and spur was 87 as kit spur and 21 pinion
motor was 6.5 epic
vampire lipos
lrp speedo tc spec

60 grams lead under each lipos

will say this is about the best set up i ve had for worksop and the kit ran well if i ve missed anything then feel free to pm me and ill get back to you
cheers g
__________________

http://www.customblitz.co.uk
Email:graham@customblitz.co.uk

Reply With Quote