hi
well I have had some good success yesterday, I have put the car back to standard as per the build manual.
no tuning parts, weights, different shocks or any thing, so after testing the car was ok but still not flowing through the turns, so I decided to modify the top carbon deck and the the battery plate.
I have opened up the four 5.5 mm holes to 6 mm and cut the battery plate and spacer in half length ways along the axis of the chassis.
now the chassis has a small amount of flex and what a difference it has made, I had another driver try the car some one of lots of experience and drivers a RB6 his report was almost perfect for him.
Settings of note ride height 24 mm front and rear, shock oils 450 core front and rear 25 degree hubs 4 degree toe in, front chamber -1 rear chamber -2.5
everything else as per the manual.
trying the car today again as the track is now dry, yesterday it was damp to wet.
|