Quote:
Originally Posted by Stilli
Hi Bomber, I know this was an old post but I am currently experiencing similar problems mostly due to my driving I know. I would be interested to know exactly what small mods are required to use the Durangos and how it affected the performance if at all.
|
You need to remove about 2 mm of material from the rear of the wish bone on the inner hingepin and drill out the outer hingepin to 3.1mm, I then used RB6 rear outer hingepins with spacers as they are a bit too long, if you are running rollbars then you will need to use the Durango bars as they need to be longer to reach the new mounting position.
No difference in performance just stronger as more material around inner hingepin