Quote:
Originally Posted by No. 46
On the roll bar question. You can fit a roll bar to the rear with just a couple of little mods.
I used an xray xb4 roll bar with the xray drop links and just cut a slot in the rear of the rear shock tower with a hacksaw. If you cut it so it fits under the rear roll centre block that acts as the clamp then just drill the holes for the drop links in the wishbone.
If you want a front roll bar you can use the sct front camber link and roll bars again just drill the hole in the wishbones.
|
Thanks for answering. Could you post some photos?
Anyway... I'm still wondering why TLR discarded a rear sway bar for the 3.0...