[Col]

Originally Posted by Darren Boyle

The Squared is not as much benefit to you as a Cubed would be, but still useful.....

You will need the following;

For the B44 - the B44.2 centre layshaft (AS9910), B44.2 centre rear CVD driveshaft AS9911), VTS slipper clutch (AS91175 or Avid equivalent) and the B44.2 centre gear cover (AS9913 or equivalent) - approx cost for all four parts £33

Your X6 Squared front suspenion and steering can all be used, but what the Squared does not have that the Cubed would have is the Graphite Nose Piece, Carbon chassis stiffeners etc, antenna mount, alloy top deck mounts, top deck posts, battery posts, Cubed body and wing, but ALL of these come in the Level 2 set, so in your scenario, the Level 2 is what you would require.

Hope that helps.......

Same sounds like it would apply to my old B44 and B4? Both originals, not .1 or .2's?