Quote:
Originally Posted by Merc190uk
HI all
im currently running core rc 5000maHr 30c/60c saddle packs but these are starting to get a slight bulge
my fist set so probably around 11 months old ?
anyway what i wanted to ask was should i keep the same spec or go for higher discharge 80 / 100c ? would this be better for our club set up and would they be less prone to swelling as they can handle a higher discharge ?
i only run a speed passion R 8.5t and controller with standard spur and 24 pinion.
any advice would be welcome as im still not that savvy on kit yet.
well subject advice anyway
|
Turnigy are fine, I ran them for a few years with no issues, these look like the latest one.
These links are for the worldwide shop, make sure you select the UK shop.
http://www.hobbyking.com/hobbyking/s...APPROVED_.html
Or
http://www.hobbyking.com/hobbyking/s...Approved_.html
http://www.hobbyking.com/hobbyking/s...ddle_Pack.html