Setup is used on ansmann mad monkey. Best so far 11laps 310.5
Front tyre yellow stagger on cut down monkey wheel. No insert.
Shocks. Ansmann xpro alloy body. 2 hole piston. 20wt oil.
Spring. Xpro black(feel very similar to team c hard spring -red)
Mounting - top inner hole on tower , bottom inner hole on wishbone.
Camber -2 degrees
Top link - inner hole on tower. Outer hole on c hub.
5mm between collar and end of shock body
Rear tyre yellow minispike blue insert on STD rat rear wheels
Shocks as above 25 wt oil
Spring as above
Mounting tower inner wbone outer
Camber -2 degrees
Top link inner top outer top outside
6mm pre load on spring.
50 grams lead on servo
Basically kit settings other than shocks and weight.
|