[Chrislong]

Hi Glenn,
My setup for Batley and Teesside are completely different when it comes to shocks. I tried my Teesside setup at York last week, and it was like a pig on roller blades.... maybe the pins and silver front springs is a bad combination.

So here is what I use at Teesside, and id like to add - the car felt VERY good:

Front:
(With yellow staggered ribs!)
37.5wt Losi oil
Orange piston undrilled
1 of the 0.1' Losi limiters
Silver springs

Mounted outside on wishbone, middle on tower


Rear:
35wt Losi oil
Blue piston undrilled
No internal limiters (or 2 AE 0.03' if not using BK2 axles)
1 of the 0.1' Losi limiter external (only when I use BK2 axles)
Red springs
3 degree rear toe in.

Mounted outside on wishbone, inside on tower.


When I go to Batley/York....
Use Yellow Minipins front and rear.
Change to pink rear springs, and middle hole on rear wishbone
Change to black front springs to tame those pins.
4 degree rear toe in.