Think wrong spur gear, you need the rc10b4 rear slipper plate which sits at the back of the spur with a hex slipper pad, then a 100 tooth B4 spur gear from rw, then the vts slipoer and a B4 slipoer spring and spring tension plate and nut then its done.
Any pics?
Quote:
Originally Posted by Ubiquitous
Welshy,
I got the B4 layshaft from Alcyon, the VTS slipper kit from AE, and the 100T spur gear from RW racing.
The center hole of the RW spur is 8 mm, the same diameter as that of the original Kyosho spur. However, the B4 layshaft diameter is 4.65 mm.
Is there a special bearing I should get or did I receive the wrong spur gear?
Cheers,
Ubi
|