Try:-
Carbon low grip chassis in shorty configuration.
76spur (to get motor as far back as possible).
High inertia side gears 35t and 21t (Found this makes a big difference).
Ball diff.
Front end :-
275cst oil and white core springs.
Inner hole on reversed wishbones, middle hole on tower.
Std camber link plate, link outside on hubs
5 degree hubs.
Alloy centre track rod or space std up by 4 mm and add 4mm under outer ball studs.
Rear end:-
200cst oil and white springs.
Inner hole on sv2 wishbones (or drill 3rd inner hole on std wishbones), middle hole on tower. Shocks will need internal limiting by about 4mm.
4degree tow in and 0 degree anti squat. Low inner pin height.
Std camber link plate, link outside on hubs.
Short wheelbase.
Should be very easy to drive
|