|
||
|
 |
|
||||||||||||||||||
|
#1
02-02-2010
|
||||
|
||||
Uh O Super Glue Leaked.....
Some of you may have seen me trying to get one of the draws out of my poly butler at the weekend without much luck. Unfortunatly I had no such luck I tried leaving it with a file just to snap it in half. Just cant get it out. Its the draw a keep my super glue in so ive come to the ocnclusion its leaked and stuck the draw in place. So tonight set about getting it out usign some nice nail varnish remover...
  So we will wait and see.... A
__________________
Ashley Williams I always thought by 2013 we would have flying cars, but we have got blankets with sleeves! 
|
|
#2
02-02-2010
|
||||
|
||||
|
carnt wait for the pick of the melted box, acetone/nail varnish will do that.
tried super glue debonder, http://www.google.co.uk/products?hl=...ed=0CBYQrQQwAA
__________________
MBModels - Schumacher Racing - Vapextech.co.uk - MRT - Savox - SMD
|
|
#3
02-02-2010
|
||||
|
||||
|
Be careful Ash, the plastic that those boxes are made of if not acetone proof.
__________________
SP12/RC10/XLS/JRX-2/XX/XXCR/XXCR-KE/XXX/XXXBK2/CR2/Xpro/B4/XX4/XXX4/X5/X11/DEX410/DEX210/DNX408/8ight/VW Golf GTI MK2/VW Golf TDI Wagon/Ovlov V70 D5/VW Beetle II (registered to Carrie)/Bailey Ranger/(does anyone read this bullshit?)/Creda Tumble2/HotPoint FE800/BOSCH SGS45C02GB/Dyson DC04/new patio doors & windows/freshly painted bannister rail & skirting boards, baby.
|
|
#4
02-02-2010
|
||||
|
||||
|
I know im going back to check it every 10 minutes or so. Just tried it now and it wont come out. At the first sign of trouble its going under the hose pipe....
A
__________________
Ashley Williams I always thought by 2013 we would have flying cars, but we have got blankets with sleeves!
|
|
#6
02-02-2010
|
||||
|
||||
|
Personally, I would get something long, thin and sharp, and break the glue down between the draw and the poly, be far quicker.
disclaimer: I hold no responsibility if you slip and gut yourself like a fish!! 
__________________
dragon paints : team tekin : fusion hobbies :SCHUMACHER RACING : Nuclear R/C for all my sticky and slippery stuff - if it needs gluing or lubing, Nuclear RC is the man!
|
|
#7
02-02-2010
|
||||
|
||||
|
Tried that Ive just been leavering it with a 2 foot long 1 inch diameter drill bit and it wont budge. So ive take nthe dive and ordered a new one as the plastic is starting to go a bit soft.
A
__________________
Ashley Williams I always thought by 2013 we would have flying cars, but we have got blankets with sleeves!
|
|
#8
02-02-2010
|
||||
|
||||
|
Have you tried a hairdrier in a ventilated space. Glue softens under heat. Not sure if you could try the kettle on it to loosen the glue.
__________________
My feedback http://www.oople.com/forums/showthread.php?t=19395
|
|
#9
02-02-2010
|
|||
|
|||
|
Failing that, fishing wire if you can wrap it round and use a sawing motion to remove the glue
|
|
#10
02-02-2010
|
||||
|
||||
|
Well...
Ive got it out!! Jeremy clarkson style. using a hammer.. Managed to get a cross peen hammer behind levered on it alot and crack some of the glue broke. Moved it along a bit bit and CRACK it came out. But unfortunatly i have had to dremel alot of the shelf above away still pleanty left. Nad there is not a hole in the back of the case. A bit of dremmelling and sand paper and a few sticks and it should be ok. Ill still see if the new one will come though.... A
__________________
Ashley Williams I always thought by 2013 we would have flying cars, but we have got blankets with sleeves!
|
|
#13
04-02-2010
|
||||
|
||||
|
Well my new one arrived today and its grey which im pretty pissed off about as the picture showed it was blue and at £80 to.
A
__________________
Ashley Williams I always thought by 2013 we would have flying cars, but we have got blankets with sleeves!
|
 |
|
|
well it isnt anymore 
Linear Mode
