Go Back   oOple.com Forums > General > I Made This !

Reply
 
Thread Tools Display Modes
  #1  
Old 03-10-2013
Origineelreclamebord's Avatar
Origineelreclamebord Origineelreclamebord is offline
Mad Member
 
Join Date: Sep 2010
Location: Netherlands
Posts: 1,571
Default DEX210 Screw-Type Wing Mounts (+Other Parts)

I decided my DEX210 is a keeper - It is cheap and performance is decent... but there are plenty of things I would do differently on the car - so why not actually change them?

First of all, the wing mounts. Body clip systems for wings are far from ideal imo: Bad fit (often has too much play) and every now and then you see a car with a half-attached wing because a clip flew off. I've made a design that is 100% compatible with the DEX210 wing mounts:



I had some issues with the first one that arrived - one measurement was 0.5mm off (the one of the bottom mounting holes), so I couldn't get the top and bottom screws in the holes at the same time.

Now it's solved, I've got some pictures:

















Good news: The wing mount fits perfectly this time! It's a nice, rigid piece too! The wing is tightly clamped on the car, it feels much better than the sloppy, wobbly unit that's in the kit. It's also supported slightly further back and over a larger area than with the stock unit, and the top cap (which is already painted black) is really convenient - it's easier to hold and harder to lose now the two sides are connected as one piece.



You may also note the small sidepod bodymounts I have made. The sidepods are just a bit low for velcro, and the body is so tight the wiring on mine lifts up the sidepods a bit... But not anymore! It can be used instead of the center rear clip, in combination with it, or just the center rear clip, in which case the body posts prevent the body from lifting up at the sides.
__________________


3D Printing Upgrade Parts - FF210 Buggy
Reply With Quote
  #2  
Old 03-10-2013
Bells's Avatar
Bells Bells is offline
Senior Member
 
Join Date: Sep 2012
Location: Roberttown
Posts: 369
Default

They look good mate
Reply With Quote
  #3  
Old 03-10-2013
GrahamH7060's Avatar
GrahamH7060 GrahamH7060 is offline
Senior Member
 
Join Date: Aug 2011
Location: Woodbridge , Suffolk
Posts: 380
Default

Nicely done !!

Put me down please for 2 wing mounts & 2 sets of body mounts please !
__________________
Associated B6.1 & B74.2
Lots of bling bits
Reedy electrics
KO Propo Espirit 4 stick radio

Dji Mavic Air2S
All round gadget freak !
Reply With Quote
  #4  
Old 03-10-2013
Lee24h's Avatar
Lee24h Lee24h is offline
Senior Member
 
Join Date: Apr 2010
Location: Northampton
Posts: 758
Default

Brilliant 1 wing mount in black please
Reply With Quote
  #5  
Old 04-10-2013
Origineelreclamebord's Avatar
Origineelreclamebord Origineelreclamebord is offline
Mad Member
 
Join Date: Sep 2010
Location: Netherlands
Posts: 1,571
Default

Thanks guys! I don't currently have a VAT-number/company, but by the sound of it I should look into that!

...even more so as I have plenty of models lying around, from DEX210 Screw-type wing mounts to suspension hangers/blocks for the Tamiya Dyna Storm, and there's more to come
__________________


3D Printing Upgrade Parts - FF210 Buggy
Reply With Quote
  #6  
Old 04-10-2013
Kosmickid's Avatar
Kosmickid Kosmickid is offline
Member
 
Join Date: Jan 2012
Location: London
Posts: 117
Default

Awesome work dude. I'll have some if your gonna produce them?!
__________________
Sakura Zero TC - Team Spec (For sale - PM for details)
Durango DEX210
Durango DEX410(2010)
Durango DEX410R
Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT. The time now is 10:32 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
oOple.com