|
|
#1
|
|||
|
|||
Schumacher kc build issues
I've just finished building my cougar kc but I've got a couple of issues that I'm struggling with so I'm hoping someone will be able to help point me in the right direction / tell me what I've done wrong.
1) steering / servo - I've mounted the servo as per the instructions but when ive connected the electronics the steering is reversed. I.e. when I turn the wheel left on the transmitter the wheels go right & Visa versa. 2) drive / power - I can get drive to the back wheels in a straight line but as soon as I turn the steering I lose drive to the rear wheels. Are the two issues related and is it going to a relatively simple fix? Thanks Phil |
#2
|
|||
|
|||
First one's easy - servo reverse on channel 1 on your transmitter.
Second not so sure about, could be one of a few things like the servo browning out the receiver if it's drawing too much power.
__________________
Back from 30 year retirement finding use for my thumbs again, slowly getting faster! |
#3
|
|||
|
|||
No the two issues are not related, as above issue one is an easy fix just reverse the channel on your transmitter.
Second one sounds like an electrical fault somewhere. I believe radio gear prioritises steering over drive as a safety feature, so you might have a loose connection of a damaged cable. Check your 3 pin servo lead going into the receiver and your 3 pin lead on your esc that is going into the receiver.
__________________
Evolution Models Team Associated B6.2 PR Racing S1 V3R EVO Schumacher Cat 2000EC Losi XX Tamiya TT-02 (Rally) Traxxas Rustler Instagram: Lofty1984 |
|
|