|
|
#1
|
|||
|
|||
Mythical Velcro?..what's the best?..
Some help needed!..I'm trying to find out what Velcro people use?..all my stuff is useless,it always comes away from the chassis and never stays on bodyshells..but if I buy a second hand car the Velcro inside is welded to the chassis and the stuff on the shell never comes off...where do you find this mythical stuff!..I've never been able to find it in my local model shop and he says it's also no good( so why stock it! ).
__________________
Mugen mbx6eco.... Mardave Cobra TQ.....IconicRc edition PB Mini Mustang......Been in the shed edition and 65 other pre 1998 iconic rc cars.... Nosram Novak Orion lrp Reedy Turnigy Futaba Schumacher proline ACTIVE SCALE MODELS.CO.UK........better than some other model shop's ive been too... |
#2
|
|||
|
|||
I use wilko stuff... Other brands are available
__________________
Team Losi Racing, Horizon Hobby TLR 22 5.0, TLR 22X-4, TLR 22-4, 22-4 2.0 Atomic Carbon S2, S44, Vega B4.1 Trader feedback: http://www.oople.com/forums/showthread.php?t=19374 |
#3
|
||||
|
||||
__________________
Fray Bentos |
#4
|
||||
|
||||
I use the stuff from Range desined to turn curtains and hems up with stick it on leave for about 24hours before you try to put the shell on or take it off lasts for ages and cheap.
__________________
Chris TeamC TM2, TC02EVO & TM4 Abisima, Savox and Orion Lazer ZX5-FS2, Rudebits DB1, Powered by Orion R10 and all Steered by Savox (and blind luck!). KoPropo EX10 Kyosho MP9 , OS Speed Paint by Magoo |
#5
|
||||
|
||||
Do you degrease the chassis and bodyshell before applying the tape? And if so, how do you do that?
|
#6
|
||||
|
||||
I've always bought heavy duty velcro off ebay...
Cleaning the surfaces, and sticking it on well before you need it so the adhesive has chance to properly cure is another good bit of advice.
__________________
AKA: Andy Nancollis 1/10th drives: Yokomo BMax2MR & BMax4 1/16th drive: Carisma GTB Racing in South West: http://www.mendiprcraceway.co.uk/ Racing in Wales: www.caldicotrcracers.co.uk Kept running by: Yokomo via MB Models & www.tracksidespares.co.uk Shells by Square Crabs |
#7
|
||||
|
||||
Clean with isopropyl alcohol and use 3m velcro myself
__________________
YZ2 sanwa hi-tec Balls out zx6 Futaba orion sanwa Need a liner resized ? Liars run for cover the truth is taking over!!! |
|
|