Go Back   oOple.com Forums > Car Talk > Mardave

Reply
 
Thread Tools Display Modes
  #1  
Old 25-07-2012
Homerjhandley Homerjhandley is offline
Member
 
Join Date: Jan 2011
Posts: 32
Default 1s Lipo from hobbyking & booster, will this work?

hi all, having issues with a single NIMH cell (not bad, lasted 2 years!) so considering getting a LIPO instead and runing that instead of 2 packs of 500Mah NIMH's.

looking at hobbyking i can get one a 5000Mah lipo for £12, so how much would this cope with a nights racing (4x5mins) as i have heard that it should cope fine (or will the 5600 be better?) http://www.hobbyking.com/hobbyking/s...Lipo_Pack.html

also what booster will i need? i also have a core 2.4G setup.

i am running a mardave brushless setup, and people have had issues with this with 1s, and again i dont want to buy lipo then find it is of no use!

any advice accepted!
__________________
Read my blog and read the Mardave only forum!

http://mardaveforums.com/
Reply With Quote
  #2  
Old 25-07-2012
stegger's Avatar
stegger stegger is offline
*SuPeRsTaR mEmBeR*
 
Join Date: Oct 2006
Location: Liverpool
Posts: 2,714
Default

Hi mate, dave @ TOP models has the boosters ;-) same as this http://www.rcracinguk.com/index.php?...oducts_id=4944

I've been running just 1 Reedy LiPo 6500mAh 3.7V 65C which lasts all night with repeaking inbetween heats, but may go to 2 so they get a proper charge due to the voltage output of the Lipo.
HTH Steve
Reply With Quote
  #3  
Old 26-07-2012
Homerjhandley Homerjhandley is offline
Member
 
Join Date: Jan 2011
Posts: 32
Default

just looking at the spec of the ESC and it says

Input Voltage.......4-6cells NiMH/NiCAD (1.2Volts DC/cell)
........................2cells Lipo (3.7Volts DC/cell)
.....minimum input 4.8V maximum input 7.4V

That rules out the 1s lipo then, and probably why a lot of people with the mardave in the club had problems and ended up buying a new ESC.

Although looking positive for the battery now, i used the novak discharger to take it to 0v and then charging it peaked at 350, but now seems to be fine, currently at 3400Mah so may have rescued it, just need to cycle it again to make sure.
__________________
Read my blog and read the Mardave only forum!

http://mardaveforums.com/
Reply With Quote
  #4  
Old 26-07-2012
Chequered Flag Racing's Avatar
Chequered Flag Racing Chequered Flag Racing is offline
Spends too long on oOple ...
 
Join Date: Feb 2007
Location: In Early Retirment
Posts: 5,988
Default

Quote:
Originally Posted by Homerjhandley View Post
just looking at the spec of the ESC and it says

Input Voltage.......4-6cells NiMH/NiCAD (1.2Volts DC/cell)
........................2cells Lipo (3.7Volts DC/cell)
.....minimum input 4.8V maximum input 7.4V

That rules out the 1s lipo then, .
it also says,
Quote:
Features:
1. Boost single Lipo’s BEC supply to 5V for receiver by DC Voltage
__________________
o0ple Trader Feedback
NE Venue's New & Old
my space on YouTube
CFR RCTV Channel
Glenn Atterton

BRCA 2005 1/10th Off-Road Veterans Champion
LMP12 National Champion 2003/2004 / F3 class
Reply With Quote
  #5  
Old 26-07-2012
jasond43's Avatar
jasond43 jasond43 is offline
Member
 
Join Date: Mar 2012
Location: devon
Posts: 175
Default

Hi all i have just brought a sky rc toro 1s 120A esc for £44.90 arived in 10 days from hong kong it runs 1 cell and 2 cell also 4 cell nimhs and it awesome easy to set up too if you want a link let us know cheers jase
Reply With Quote
  #6  
Old 26-07-2012
capt-flatout's Avatar
capt-flatout capt-flatout is offline
Member
 
Join Date: Jul 2011
Location: portsmouth
Posts: 89
Default

Quote:
Originally Posted by jasond43 View Post
Hi all i have just brought a sky rc toro 1s 120A esc for £44.90 arived in 10 days from hong kong it runs 1 cell and 2 cell also 4 cell nimhs and it awesome easy to set up too if you want a link let us know cheers jase
great esc! the only issue i find with them is the soldering is allways poor on the receiver plug and needs resoldering.
__________________
teh-r31 drifters, exo terra
Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT. The time now is 06:56 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
oOple.com