|
#1
|
||||
|
||||
GB-02 front suspension mod
I've had two months to play with my GB-02 Buggy Champ. Haven't done much with it that Jimmy hadn't tried in his review. You can read about mine at http://www.bigbigplanet.com/rccars/gb02
I did the 630 ball bearing suspension mod just as suggested in Jimmy's review which really helped free up the front suspension. I had some extra Tamiya TL-01 hingepins lying around so while I had everything open, I did some quick measurements and found them just a tiny bit longer than the stock GB-02 suspension pins, so I used them to get a bit more camber and width on the buggy.
__________________
http://www.modrc.com |
|
|