8 mm + chassis use both 210 size bodies

[skybug]

If you changed to the +8 mm chassis you may think that you need to buy a new body to suit ,but you don't have to with this mod! All you need is a wing that you don't use anymore that's cracked or whatever.make sure it has a lip on the back. Cut down the wing about 30 mm .you will end up with a L shape piece. Now looking at the the area where the wing brackets go remove the screws and cut the piece of lexan to fit over the gearbox and against where the screws go ,then with a reamer or similar mark where the screws go ream it out and on the long part of lexan apply HD Velcro and the other piece of Velcro to the under part of the back of the body and that's it .if you are under 18 make sure you get adult supervision using any sharp craft knives or reamers,hope this helps you,let me know how you get on