|
#1
|
||||
|
||||
501x Gearing
Hi guys,
I've got a 501x - standard kit spur - Nosram 6.5 brushless - IB42's Do you think the kit pinion (17t) is going to be too much for a general size off road track over 5mins? If so, then what size are we looking at? 12-13?? Thanks |
#2
|
||||
|
||||
Hi, I used a 21t pinion on my car with a 6.5 it worked out to be the exact ratio that novak say to use in their manual,I use a 17t at the moment on a novak 5.5 never had any probs on either one and it never gets too hot, so should be fine.
|
#3
|
||||
|
||||
thanks, just I wanted to hear!
|
#4
|
|||
|
|||
lrp/nosram head honcho (jurgen) says a 6.5 should be run on approx ratio of 12:1 so in a big pulley 501x that equates to 16t/96t
or small pulley = 18t/96t hope this helps
__________________
proracing Moss Models Associated Reedy DJ KIRKY |
#5
|
||||
|
||||
It does... thanks!
|
Thread Tools | |
Display Modes | |
|
|