|
#1
|
|||
|
|||
B5m - front arm differences?
Looking for some info please?
What are the differences to handling etc on B5m front arms? - Straight arms? - Gullwing arms? - standard and hard type? I've only run straight front arms up until now, so I'm keen to know what the differences are in handling and also if there are any differences in durability between the std and hard arms.
__________________
Thanks Duncan Pole www.glasgowrc.com ae B6.2 & B6.2D ae RC10 Team Car (original black tub version) Sanwa - Reedy - Savox - Hobbywing - Centro - THR If I have any stuff for sale you will find it here:- http://www.ebay.co.uk/sch/duncanglas...1&_ipg=&_from= |
#2
|
||||
|
||||
Quote:
Hi, The B5m from kit comes with gull wing arms, b5 (rear motor) from kit comes with flat arms. You need to use the gull wing tower with the gull wing arms, flat tower with flat arms. Straight arms, I've found these give more neutral handling. Suspension stays consistent through out compression. Gull wing, these can give a little more steering, shock becomes softer near full compression, due to change in angle (angle of arm). Can give a sudden increase in steering as suspension nears full compression. Standard vs Hard. In high traction hard arms should provide a more consistent car. As it will reduce unwanted arm (tower) flex. Down side is arm (tower) is harder and more prone to breaking. MiCk B. :-)
__________________
http://www.dublinmodelracing.com/ (Off-road racing in Dublin) http://www.p-dubracing.co.uk (Stocking: 8Racing / AVID / GHEA / Xpert Racing / Factory R/C / Alton Design Innovations) http://www.msdmodels.ie/ (Trackside and on-line RC supplies.) |
#3
|
|||
|
|||
Thanks!
Ok great info, thank you. is there a way to tell which tower I have on the car? I got it 2nd hand so I'm not sure....
__________________
Thanks Duncan Pole www.glasgowrc.com ae B6.2 & B6.2D ae RC10 Team Car (original black tub version) Sanwa - Reedy - Savox - Hobbywing - Centro - THR If I have any stuff for sale you will find it here:- http://www.ebay.co.uk/sch/duncanglas...1&_ipg=&_from= |
#4
|
||||
|
||||
Look at the middle of the tower. If it's got a angle section like the picture it a wide tower for gullwing arms or it is straight its a narrow tower for straight arms.
I wouldn't recommend mixing the arms and shock towers. Mine came with gullwing arms and a narrow tower and handled weirdly until I fitted the correct tower
__________________
Team Xtreme Predator X11, Associated b64d, Associated b6.2d, Arc A10, Awesomatix A12, Xray NT1.3 |
Thread Tools | |
Display Modes | |
|
|