|
#81
|
||||
|
||||
X-pro, had no motor plate issue's, and mine is green.
__________________
dragon paints : team tekin : fusion hobbies :SCHUMACHER RACING : Nuclear R/C for all my sticky and slippery stuff - if it needs gluing or lubing, Nuclear RC is the man! |
#82
|
||||
|
||||
Yeah mine is the X-Pro and has the Green plate - No issues so far!
__________________
|
#83
|
|||
|
|||
you can of course use a nut and fraction longer machine screw on the plate as it works and has room to clear, its what ive done
|
#84
|
||||
|
||||
As its been mentioned now. Yes there is a problem...
My Madrat, all 4 screws were rubbish, finger tight on the thread and it wouldnt tighten up. Ansmann were really good, and supplied a new plate, which is of much higher quality. It actually looks different as if it has also had the sides machined to be super smooth, rather than resembling a rough casting type finish if that makes sense. A slight variant of green as well. I also had a rubber diaphram missing on one of my shocks, when i filled it with oil, i was checking the rebound pack, and wondered at first why it didnt drop down at all lol. Col.
__________________
TRF 501x - Tamiyafied Madrat - Bograt Rc10 FT T4 RC18T Lunchbox Gold X-6 squared Lrp, Novak, Robitronic, Ko Propo, Ezrun , Trakpower ,Team Scream, Demon, Microtech, Dms, Good old Jezza, Je-Spares, Bolton Model Mart, My Feedback http://www.oople.com/forums/showthread.php?t=25199 |
#85
|
|||
|
|||
any solution to the t plate breakeages yet? really need one as im intending on racing next weekend...
|
#86
|
||||
|
||||
The Carbon ones are nearly done i'm told and should be available through Ansmann direct - I'll try and find out exactly when but i'm sure you should be able to get another standard plastic one from somewhere?
__________________
|
#87
|
||||
|
||||
j&l have them great service from them aswell
__________________
DO NOT BUY/SELL TO THIS USER. |
#88
|
|||
|
|||
do you have a link to the plastic one? i can only see them as out of stock...
i have mine braced with aluminum at the moment, keeps the crack together and doesnt change the angles at the back too much |
|
|