|
#261
|
||||
|
||||
Springs
Whats is the general consensus on springs? AE or Tamiya?
|
#262
|
||||
|
||||
How are the 5.5 Tekin motors on this kit? Ive heard good things about those for this kit.
|
#263
|
||||
|
||||
My db01 one way has been modified to fit my car.
It has been like this for an entire season, the pulley is very snug and is not wobbly or loose. Rubber servo spacers on the back, cut off some df03 shock pistons, and bam! It works perfectly. If you do this mod, make sure to threadlock the futaba servo screws in the pulley. This trick I pulled off successfully last year and my car has been like that ever since. Dont tighten the screws all the way down just enough to see the screw barley sticking out of the one way. I had to do this mod because the 501x one way my local shop couldnt get it in. So I had no choice but to do this mod. The pulley is a 36 tooth TA-05 one way pulley. A real tough trick to do but the third pick below is the direction it goes in the front. The belt fits inside the pulley correctly when installed in this direction. I must be either really smart to figure this out, or just dumb luck... I dont classify this as bad information. It has worked great for me!
__________________
Associated B44, Tamiya 501x Worlds Edition Losi XX-4 finished project TRF 201(coming soon) |
#264
|
||||
|
||||
I have a 501X one-way assembly for sale if you're interested. You just need the one-way pulley and one-way adapter (54006).
__________________
Tamiya America - Trakpower - 92Zero Designs |
#265
|
||||
|
||||
I use the Tamiya springs as the spring rates available suite the track I use (blue - front, yellow - rear). Both AE & Tamiya springs are perfectly good. Just use the ones that give you the spring rate you need for the setup and track that you use.
Quote:
James |
#266
|
||||
|
||||
Quote:
Later on I'll let you know. My 511 body, undertray, and 511 wing set comes in tuesday next week. They had to "special order" the 511 stuff for me.
__________________
Associated B44, Tamiya 501x Worlds Edition Losi XX-4 finished project TRF 201(coming soon) |
|
|