|
#1
|
||||
|
||||
DB-01 hop-up part numbers
Since there's been a few threads asking about DB-01 hop-ups recently, I came up with a list of part numbers. Feel free to add to it.
Tamiya 42117 TRF Blue Titanium Turnbuckle 3×23mm - 2pcs (need 1 for servo drag link) 42118 TRF Blue Titanium Turnbuckle 3×32MM - 2pcs (need 1 pair for steering links) 42120 TRF Blue Titanium Turnbuckle 3×42MM - 2pcs (need 2 pairs for camber links) 42142 TRF 3mm Ceramic Ball Diff - 12pcs 42171 620 High-Capacity Thrust Bearing (includes 8 1/16" balls & 2 thrust washers) 42193 TRF Tungsten Thrust Bearing Ball - 8pcs (requires 42171 thrust washers) 42283 Double Cardan Joint Shaft Buggy Front 2pcs For DB01 DB02 TRF502X TRF503 42284 1/10 Buggy Double Cardan Joint Shaft - Rear 2pcs 51090 4 pack of 950 bearings for use with 53967 51272 TRF501X C Parts - Front Upright (stiff version of 51308) 51275 TRF501x Lower Front Arm 51279 TRF501x Lower Rear Arm 51286 TRF501X diff joint set (need 2 sets if upgrading both front and rear) 51287 TRF501x Diff Plate 51341 TRF416 Diff screw (not nut) fits and makes the diff adjustable without removing the driveshaft 53539 5.5 Aluminum Spacer Set 53709 Flourine Coated suspension balls 53884 TA-05 Carbon Battery Plate (useful for Lipos) 53907 5x8mm Aluminum Ball Connector 53961 TRF501x Aluminum Caster Block 53962 TRF501x Aluminum Rear Upright 53963 TRF501x Stabilizer Set 53967 TRF501x Eccentric Belt Tensioner 53970 Dust Protector Seal for Differential Gear 53972 TRF501x Aluminum Steering Bridge 53974 TRF501x Front Spring Set 53975 TRF501x Rear Spring Set 54015 DB01 Front Assembly Universal Shafts (choose between this, 54118 and 42283) 54016 DB01 Rear Assembly Universal Shafts (choose between this, 54119 and 42284) (not recommended if running TRF Buggy Aeration Dampers) 54017 DB01 Front One-Way Set 54018 DB01 slipper clutch set (Choose between this and 54061) 54023 Front one way spare pulley 54024 DB01 Titanium screw set 54028 TRF Buggy Aeration Damper set 54033 Carbon reinforced A parts - gearbox covers etc 54034 Carbon reinforced D parts - caster blocks 54035 Carbon reinforced L parts - steering arms 54036 Carbon reinforced M parts - shock towers and hinge pin blocks 54037 DB01 Front Aluminum Suspension Mount 54038 DB01 Rear Aluminum Suspension Mount 54039 DB01 Aluminum Suspension Block (2 Pcs.) (need 2 sets if doing the whole buggy) 54040 Aluminium motor heat sink plate (only for use with 54041) 54041 Carbon reinforced chassis (with cell cutouts and heat sink hole) 54051 DB01 Aluminum Center One-Way Pulley (18T) 54061 DB01 Double Slipper Clutch Set (Choose between this and 54018) 54079 Aluminium motor mount (big money!) 54118 DB01 Assembly WO Univ Shaft (Front) (CVD style, wider angle than 54015, 950 inner bearing, new knuckle) 54119 DB01 Assembly WO Univ Shaft (Rear) (CVD style, wider angle than 54016) 54131 RC DB01 Front Upright - For WO Assembly Univ Shaft (replacement knuckle for 54118) 54134 Lowered Buggy Racing Wing Set 54141 High Traction Lower Arms - Front 54142 High Traction Lower Arms - Rear 54148 Aluminum Steering post 54149 Aluminum Racing Steering Set 51470 Maintenance parts set for Gear Diff Unit Cup Joint (51472) 51472 DB01 Gear Diff Unit Cup Joint (spare for 54329) 54257 5mm Reinforced Ball Adjuster (grey) 54329 DB01 Gear Differential Unit 54443 Carbon Reinforced E Parts - XV-01 (Rear Uprights) (uses 1350 outer bearings) 84089 2.6x8mm Titanium Screws 9804313 TRF501X Hex hub (spare) (UPDATE: BETTER TO SWAP TO 54668 12mm hex and 51580 front wheels) FOR SWITCHING TO 12MM HEX SYSTEM, YOU NEED --------------------------- 54668 4WD Buggy Aluminum Hex Hub Front Blue For Tamiya TRF502X TRF503 DB01 RRR DB02 54669 4WD Buggy Aluminum Hex Hub Rear Set Blue For Tamiya TRF201 TRF211 TRF502X TRF503 DB01 RRR DB02 * 51580 DB01RRR F Wheels, 54748 DB01RRR Yellow F Wheels, 53880 (DF03 F Wheels would also work) 51581 DB01RRR R Wheels, 54749 DB01RRR Yellow R Wheels, 53881 (DF03 R Wheels would also work) JAAD JDRDB301 3mm Black Ceramic Differential Ball Set - 12 pcs (need 2 sets for front and rear diffs) 3Racing DB01-04 Aluminium Front Suspension Mounts DB01-06 Aluminium Rear Suspension Mounts
__________________
http://www.modrc.com Last edited by sim; 05-07-2017 at 12:36 AM. Reason: Added new parts |
#2
|
||||
|
||||
This is usefull thanks? Can someone make it a sticky??
__________________
You will respect ma authorataaa! |
#3
|
|||
|
|||
More....
53967 TTRF501X Eccentric belt tensioners (pap in my opinion)
51090 4 pack of 950 bearings for use with 53967 54023 Front one way spare pulley 54033 Carbon reinforced A parts - gearbox covers etc 54034 Carbon reinforced D parts - caster blocks 54035 Carbon reinforced L parts - steering arms 54036 Carbon reinforced M parts - shock towers and hinge pin blocks 54040 Aluminium motor heat sink plate (only for use with 54041) 54041 Carbon reinforced chassis (with cell cutouts and heat sink hole) 54079 Aluminium motor mount (big money!) I wonder what numbers 54037-54039 are??? |
#4
|
|||
|
|||
Quote:
|
#5
|
|||
|
|||
Well, yes they are out of the same mould as the kit stock parts but I'd define it as a "hop-up" material. I mean, its not standard so....
|
#6
|
||||
|
||||
does anyone know where I can find some 501x diff halves? I can't find them online anywhere - even ebay doesn't have any.
|
#7
|
||||
|
||||
Craig,
Try http://www.rc-champ.co.jp/Champ_Inte...onal_index.htm it's in Japenese but email them and they always get back to you pretty sharpish and are good for postage too. It's where I got mine from. Ian
__________________
Dragon Paints |
#8
|
||||
|
||||
Quote:
|
#9
|
||||
|
||||
Quote:
RC-Champ are good, if a little slow these days, and their shipping isn't as cheap as it used to be, try the link above, Craig, thats where mine comes from, need any advice, you got my number...
__________________
dragon paints : team tekin : fusion hobbies :SCHUMACHER RACING : Nuclear R/C for all my sticky and slippery stuff - if it needs gluing or lubing, Nuclear RC is the man! |
#10
|
|||
|
|||
Quote:
|
#12
|
|||
|
|||
501x diff halves
Quote:
I got mine from http://www.davesrcmodels.co.uk/ irish compant - sent no problems james |
#13
|
||||
|
||||
50994 5mm Suspenion Balls
51275 TRF501x Lower Front Arm 51279 TRF501x Lower Rear Arm 51286 TRF501x Diff Joint 51287 TRF501x Diff Plate 53539 5.5 Aluminum Spacer Set 53907 5x8mm Aluminum Ball Connector 53961 TRF501x Aluminum Caster Block 53962 TRF501x Aluminum Rear Upright 53963 TRF501x Stabilizer Set 53967 TRF501x Eccentric Belt Tensioner 53972 TRF501x Aluminum Steering Bridge 53974 TRF501x Front Spring Set 53975 TRF501x Rear Spring Set 54015 Front Universals 54016 Rear Universals 54018 DB01 Slipper Clutch 54024 DB01 Titanium Screw Set 54033 Carbon Reinforced A Parts 54034 Carbon Reinforced D Parts 54036 Carbon Reinforced M Parts 54037 Aluminum Suspension Mount Front 54038 Aluminum Suspension Mount Rear 54039 Aluminum Suspension Block 54079 Aluminum Motor Mount 54134 Lowered Buggy Racing Wing Set 54141 High Traction Lower Arms - Front 54142 High Traction Lower Arms - Rear 54148 Aluminum Steering post 54149 Aluminum Racing Steering Set 84089 2.6x8mm Titanium Screws |
#14
|
||||
|
||||
84051 Limited edition Black Diff pulleys, dunno if they are any better than the kit ones tho.....
__________________
Sworkz S350 BE1 EU - Tekin RX8 G2 - Tekin T8 G2 1900kv - Xpert SI-4531 BLS Yokomo B-Max2 MR ver2 Factory - Vampire SR1 - Vampire Type AB+ v2 7.5t - Savox SC1251 TLR 8ight T 2.0 Tekno - Tekin RX8 G2 - Tekin T8 G2 1700kv - Savox SA1283SG TLR SCTE 2.0 - Tekin RX8 G2 - Tekin Pro4 4600kv - Xpert SI-3401 BLS LC Racing EMB-1 & EMB-SC Sanwa MT4 Intellect & Gens Ace Powered |
#15
|
|||
|
|||
bodies
Does anyone know if the 511 body fits?
Any other bodies? |
#16
|
||||
|
||||
511 doesn't fit due to the way the motor sticks out. Only the Baldre and Durga shells are available as far as I know.
|
#17
|
||||
|
||||
Just to let people know, the TA05 carbon battery plate (53884) also fits the DB01 and helps a lot with fitting bigger lipo's. As it is thinner than the stock plastic part, it allows the battery posts to be screwed in further (I have lost a couple of posts due to having to raise them to fit my lipo in).
|
#18
|
||||
|
||||
Added the new gear diff option.
__________________
http://www.modrc.com |
#19
|
||||
|
||||
501x diff
just bought some 501 diff halfs off ebay from tonys tamiya parts used him before great service
|
#20
|
||||
|
||||
53968 Tamiya 5x5mm Hard Hex Head Ball Connector 5pcs (Hardened Steel)
53969 Tamiya 5x8mm Hard Hex Head Ball Connector 5pcs (Hardened Steel) 53980 Dust Cover for Adjuster 54090 TB03 TB03 Aluminum Servo Stay - Right/Tall (choose this or 54091) 54091 TB03 TB03 Aluminum Servo Stay - Left/Short (choose this or 54090) 54280 DN01 Rear Dish Wheels Pink 54282 DB01 Front Dish Wheels Pink 54286 DB01 Front Dish Wheels Fluorescent 54287 DN01 Rear Dish Wheels - Fluorescent Yellow 54385 DB01 Carbon Damper Stay - Front 54386 DB01 Carbon Damper Stay - Rear 54390 Large Ball Diff Alloy Plate (harder & flatter) 9804334 2.6x8mm Cap Screw - 10pcs (perfect for motor cover w/ large 2mm hex) 42117 TRF Blue Titanium Turnbuckle 3×23mm - 2pcs (need 1 for servo drag link) 42118 TRF Blue Titanium Turnbuckle 3×32MM - 2pcs (need 1 pair for steering links) 42120 TRF Blue Titanium Turnbuckle 3×42MM - 2pcs (need 2 pairs for camber links) 42142 TRF 3mm Ceramic Ball Diff - 12pcs 42171 620 High-Capacity Thrust Bearing (includes 8 1/16" balls & 2 thrust washers) 42193 TRF Tungsten Thrust Bearing Ball - 8pcs (requires 42171 thrust washers)
__________________
HE>i |
|
|