|
#1
|
|||
|
|||
Help with brushless sensored motor problem
My B4 drives fine, but when it stops, it will only start running again if given a gentle push to get it started.
Any ideas what's wrong with it (Speedo or motor problem?). I have tried doing a reset on the esc. Yesterday I replaced the servo if that's relevent. Novak GTB 6.5T combo Thanks |
#2
|
|||
|
|||
check the sensor wire first, replace it, then if still the same try and differant motor then you will find where you have the problem, if it still same after differant sensor wire and motor then sounds like to do with ya esc.
|
#3
|
|||
|
|||
I am trying to buy a new motor now , so when this arrives, I will do as you suggest.
|
#4
|
|||
|
|||
OK, so I have fixed this now. I unplugged the sensor cable, gave it a clean, then plugged it back in. It works fine now.
|
|
|