|
#1
|
|||
|
|||
DB-01 durga gearing?
I have just picked up a second hand durga.
Can someone advise what pinion gear sizes would be appropriate for me. I Have a 91 T spur, and am going to be running it with a 13T brushless motor for now. I also have a 6.5T and a 5.5T that I'll try in there at somepoint. Thanks |
#2
|
||||
|
||||
6.5 anywhere between 17 and 19
__________________
dragon paints : team tekin : fusion hobbies :SCHUMACHER RACING : Nuclear R/C for all my sticky and slippery stuff - if it needs gluing or lubing, Nuclear RC is the man! |
#3
|
|||
|
|||
Thanks DCM. What about for my 13.5T motor. This is what I I have put on there today and I and I put a 21T pinion on. Would this be about right? I haven't run it yet as I am just sorting a steering servo out for it.
|
#4
|
||||
|
||||
no idea, I don't own a 13.5 motor, sorry
__________________
dragon paints : team tekin : fusion hobbies :SCHUMACHER RACING : Nuclear R/C for all my sticky and slippery stuff - if it needs gluing or lubing, Nuclear RC is the man! |
#5
|
||||
|
||||
I think 20t pinion is recomended for a 10.5 so the 21t may not be far off. Try it and check the motor temp doesn't get too high.
|
|
|