|
#1
|
||||
|
||||
df03 brushless
mmm may have to get the old dark impact out, its been over 3 yrs since i last raced so things have bound to have changed, can any one tell me please if there is a brushless system for the df03, and any suggestions on gearing, still have a team orion 6.5 kicking around somewhere
many thanks darryl
__________________
york offroad car club tamiya dark impact team xtreme predator x10 tenth technology predator xk98 |
#2
|
||||
|
||||
re
hi there
hobbywing makes some good combos (motor,esc,program card) ebay has good deals(beware of fake ones) or on the for sale section here you could pick up a used esc for a decent price. Have you upgraded the shocks on your df03? I changed mine to the TRF ones and its like night and day difference. get some different pinions and play with the ratios, i run a 23 82 ratio or a 26 82 depending on the track etc. check to see if the grease has not dried up in the diffs (after 3 years) hope that helps!
__________________
TRF 502x DF03 3racing conversion DF03 KMRC conversion http://l-m-racing.co.uk http://www.modellbau-seidel.de http://www.machheemstede.nl Team TRF NL |
#3
|
||||
|
||||
thanks for the info ,much appreciated, i used to race it all the time, (brushed) as could never find a brushless speedo small enough to fit, hence why im asking, upgraded shocks with associated threaded ones, cvds all round and a one way in the front
__________________
york offroad car club tamiya dark impact team xtreme predator x10 tenth technology predator xk98 |
#4
|
||||
|
||||
http://stores.benl.ebay.be/RC-FANS88...=p4634.c0.m322
bought EZrun from this guy, it's the real deal (according to all the fake checks) while I also ordered one from http://myworld.benl.ebay.be/demonerr...id=p4340.l2559 , turned out to be a fake, look at the box and manuals you can actually see they scanned the original and printed it again as there's a loss in resolution both ezruns do their job fine, so far no difference. regarding DF03, you're running with slipper clutch?
__________________
Ansmann ARE-2 - 5.5T C4.1 Centro - 7.5T X-Factory SCX-60 - 10.5T Hyper 9e - MMM |
#5
|
||||
|
||||
yes running a slipper clutch too, ill have a look at the ez range cheers
__________________
york offroad car club tamiya dark impact team xtreme predator x10 tenth technology predator xk98 |
#6
|
||||
|
||||
You making a comebach fella?
|
#7
|
||||
|
||||
not sure mate, may have a go now and again
__________________
york offroad car club tamiya dark impact team xtreme predator x10 tenth technology predator xk98 |
#8
|
||||
|
||||
Good lad!
|
#9
|
|||
|
|||
phew..
I thought I might be the only one left....
I've got a dark impact. Front One way + slipper clutch (a must if you are running a brushless) Im running a yeah racing brainpower esc with a 12/13T motor (sensorless). I'm yet to tune it up cos on full throttle it just spins! I also bent a front dogbone...they aren't that beefy... It would be nice to know how you get on... I still intend to race mine! Naushad |
#10
|
||||
|
||||
re
i run the 60a HW in my kmrc and a alpha car esc which is a rebranded HW in my 3racing, the 60a HW fits no probs in the df03, but its a old version so im not sure if the newer models are the same measurements, i will measure my esc and let you know.
i race both my DI's regulary, just dont overpower them and they go really well. the only real problem i have with the df03 series is the rear shock mount, its so weak and flexes alot and if you use carbon towers the rigidness of those snap the mount even quicker..
__________________
TRF 502x DF03 3racing conversion DF03 KMRC conversion http://l-m-racing.co.uk http://www.modellbau-seidel.de http://www.machheemstede.nl Team TRF NL |
#11
|
||||
|
||||
trying out some oldy DF-02 with brushless, using stock spur and 16T with 5T motor brushless was a bit overkill; 19T + 10.5T seems a bit underpowered? is that possible?
__________________
Ansmann ARE-2 - 5.5T C4.1 Centro - 7.5T X-Factory SCX-60 - 10.5T Hyper 9e - MMM |
#12
|
||||
|
||||
i raced my dark impact with reasonable success, using a novak cyclone and an 11turn motor, preety damn quick and heat was not an issue, and that was racing indoors, regarding rear shock tower, i stayed with the stock one, ok it flexes alot which gives a bit more roll, but used associated shocks with number 1 pistons, and silver springs, cant remember what oil tho,like i said it was 3 yrs ago ha ha
__________________
york offroad car club tamiya dark impact team xtreme predator x10 tenth technology predator xk98 |
#13
|
||||
|
||||
Quote:
__________________
york offroad car club tamiya dark impact team xtreme predator x10 tenth technology predator xk98 |
#14
|
||||
|
||||
A bit of beach sand got into spur gear cover of DF-02, made a mess of things
__________________
Ansmann ARE-2 - 5.5T C4.1 Centro - 7.5T X-Factory SCX-60 - 10.5T Hyper 9e - MMM |
#15
|
||||
|
||||
yup real messy lol! nice photo
__________________
TRF 502x DF03 3racing conversion DF03 KMRC conversion http://l-m-racing.co.uk http://www.modellbau-seidel.de http://www.machheemstede.nl Team TRF NL |
|
|